SALINOFIX^® 5005 Series

Hardening agent for demineralized water.

When demineralization or reverse-osmosis systems are used in print shops to process the tap water, blending to a residual hardness of 8^o to 10^o d is necessary before the processed water is used for offset printing.

One way of doing this, is to blend it with tap water. However, if the quality of the tap water is subjected to severe fluctuations because it is drawn from several areas, or if high concentration of other detrimental ingredients such as corrosion-promoting chloride are present, this is no longer possible. In such cases we recommend using 0.5% SALINOFIX in demineralized water.

SALINOFIX is a product used to adjust the total hardness of water for offset printing, and contains no constituents that might interfere with printing the process.

Demineralized water form reverse-osmosis systems and water containing SALINOFIX have both a slightly corrosive effect on metals. All pipes and fittings should therefore consist of either plastic or stainless steel. Its special properties are:

• For adjusting total hardness of softened or full demineralized water.

• Corrosive effect on metals.

Special characteristics

• The recommended addition of the SALINOFIX 5005 series is 0.5%.

Home · Contact Us · Services · Materials · Machines
Sitemap · About Us · Search

Copyright © 2000 G. Syriani & Sons.