Rotary creasing

SANDVIK RULES

DieFlex Cutting

FlatBed Creasing

Rotary cutting rules

Sandvik's partnership with National Steel Rule of America has developed a broad range of rules that have been performance evaluated against the criteria of pressure required to cut a given material, penetration into blanket, appearance of substrate edge after diecutting, wear of rule and bend ability.

Data on thickness and heights of each product are available on request.

Sandvik's international rotary service centers, using National's Accu Curve technology, provide an even faster service for pre-curved rule for all cylinder sizes. The rules are stress relieved for improved performance.

NEW Euro-Cut^TM

Jointly developed by Sandvik and National, Euro-Cut^TM is the first strong cutting rule specially designed to meet the needs of European diemakers and diecutters.
Euro-Cut^TM is a shaved edge, symmetrically ground, center bevel rule that incorporates Nat-Ex^TM hardening technology.
Euro-Cut's^TM unique 8 and 10 tooth design reduces cutting pressure on heavy and wet board which improves stripping and extends anvil life.

Klean Kut

8, 10 and 13 tooth Klean Kut are designed to cut with minimum pressure and penetration on both light and heavy board.
Klean Kut is a multi-purpose rule that works extremely well on fibrous materials, plastics and corrugated boards. An excellent choice for tough lead edge applications.

Prism

Combines the benefits of a longer shaved bevel for improved release and with an induction hardened edge for longer life. It reduces edge crush and is excellent for medium to heavy boards.

Scalloped

A rule with an extremely durable tooth that works well in the most demanding of applications. The 8 tooth center bevel leaves a clean scalloped edge on solid fiber substrates, rubber and certain plastics and a straight edge on corrugated material.

SST

Serrated scalloped tooth (SST) is an 8 pitch rule designed to produce a safety edge on corrugated, that reduces paper cuts in hand packaging operations.

11, 16 and 20 Tooth

11 tooth is ideal for foam and composite materials that are likely to stretch prior to cutting.
16 tooth is suitable for displays and applications where edge appearance is critical.
20 tooth gives a clean edge and also performs well on lighter boards and micro flute.

Home · Contact Us · Services · Materials · Machines
Sitemap · About Us · Search