|
SANDVIK RULES
DieFlex Cutting
FlatBed Creasing
FlatBed Special
Rotary Cutting
Rotary Creasing
DieSteel Cutting
|
|
Diemaking rules
Rotary creasing & special rules
|
The Sandvik/National partnership is further enhanced with a broad range
of rotary rules that has been specifically engineered to provide optimum performance. |
|
Creasing rules
Sandvik and National have addressed the importance of a creasing rule - it should never be
underestimated. It is a critical factor in controlling the sheet as it passes through the diecutter.
| Standard |
A complete range of standard
creasing rules from 3 point through to 8 point. Available with either a
radius profile or a flat top. |
| Laser Crease |
Designed to save time by
eliminating the need to cut 6 and 8 point lines, its thinner body makes it
much easier to notch.
Laser crease is made from a solid piece of tempered steel which ensures
that the head will not separate from the base during diecutting. |
| Tru-Fold |
This exclusive rule has a bead
formed on the 8 point head and a steel shoulder support to provide an
accurate line score. |
Special rules
Each rule has been subjected to rigorous evaluation to determine the pressure
required for a given substrate, blanket penetration, edge appearance after use,
longevity of the rule and bend ability.
| Perforating |
There is a perforating rule for
every requirement - folding, holding blanks together or for tearing.
Available in any tooth and crease combination. |
| Cut-Crease |
A combined precise cut section
and a defined gullet height gives a combination rule that is designed to enhance folding for
corrugated or folding carton applications. Available in any tooth and crease combination. |
| Wave |
Designed to provide a more
aesthetic appearance on displays. Available in many wave configurations. |
| Zipper |
Designed to maintain packaging
integrity throughout the distribution route, yet provide a package that
can be easily opened. Available in a variety of forms. |
| EZ Score |
This rule eliminates the
corrugated problem of double roll over score with the corrugation or with
trays or displays where the outer lines may become cut. It has been designed to cut the inner liner and medium
without piercing the outer liner. |
| Prenicked |
Prenicked rules ensure that
the blanks stay together throughout the diecutting and stripping processes, yet separate easily in the blanking section. |
| Miter Tight |
Miter tight blades are
designed to prevent scrap build-up by precisely matching the contouring of
the bevel rules currently used in lead edges and around all trim breaking areas. |
|
|
