| Dieflex 52 |
The original 52o Dieflex is the most commonly
used rule with its ideal combination of hardness and flexibility. |
| Dieflex 42 |
All the benefits of the original 52o but the
42o angle requires less cutting pressure, gives a longer cutting life and reduces slivers and dust. |
| Dieflex Auto |
Specially designed for use with automated bending equipment. |
| Dieflex Ultra |
Available with both 52o and 42o
edge, its friction reducing coating on the cutting edge helps it remain sharper longer, gives make-ready advantages and reduces slivers and dust. |
| Dieflex Hard |
A rule with all the Dieflex features but with a body hardness of 400 HV. |
| NEW Dieflex Superhard |
Good bend ability makes this rule particularly suitable for automatic bending
machinery. It bends to an angle of 160o! |
| Hard High Rule |
Decarburization provides good bend ability. It is edge hardened
to increase rule life. Available with shaved or ground edges up to 100mm high in all edge configurations. |
| Dieflex - GR |
A fine ground edge makes it an ideal rule for cutting more difficult materials. |
| NEW Dieflex - G12 |
The very fine ground edge requires less cutting pressure and reduces slivers and dust. |
