|
|
|
|
|
| Home | Contact Us | Services | Materials | Machines | About Us | Search |
|
|
CHEMICALS
Rapid Access
Repro Room
Press Room
Plate Making
Auxiliary |
|
PLATE MAKING CHEMICALS
Plus correcting pens
For plate retouching with an anti-evaporation aluminum body.
Fargum M 1085 These requirements are fully satisfied by RIEF Fargum M 1085, especially created for use in developing processors both with diazo positive and negative presensitized plates. Fargum M 1085 excludes the formation of mildew, does not crystallize on the conveyor and squeezer rollers, neutralizes alkaline surfaces and allows a right preparation of corrections. During printing start ups Fargum M 1085 dissolves, ensuring a rapid inking favored by the special lypophile additives, which guarantees clean printing without fogging. It is used for the plate baking solution.
Fargum O RIEF Fargum O, is especially created for medium gumming use in manual processing. It is a neutral medium gumming substance for application with a sponge. This product is particularly adapted for plates which will be used again after a short period in storage. After the end of the printing process such plates should be washed off while the gum is still wet. The ideal product for this purpose is our Cleaner Gum. Fargum O may also be applied for longer press stops.
Fargum Z RIEF Fargum Z is an etch gumming solution. It is a medium gumming solution with etching properties also applicable for manual processing, especially for production runs. Fargum Z regenerates and makes the plate surface hydrophilic and ensures brilliant printing. In case of considerable scumming using Fargun Z, you can solve the problem with our products plate Cleaner 90 or Polish 90.
Fargum V RIEF Fargum V is a gumming solution which greatly improves the inking. It is an alternative product to Fagum M 1085, only for manual processing. Fargum V is applied after development and corrections are completed. Due to special additives this product makes the process of inking the printing plate much faster.
|
|
|
|
|
Page Number: 1 2 |
|
|
Copyright © 2000 G. Syriani & Sons. |